Person inspecting a tire sidewall on a parked car in daylight

How to Find the Load Index on a Tire Sidewall

The load index is usually the two- or three-digit number in the tire size code, placed right before the speed rating letter. Reading it wrong can lead to a tire that cannot carry your vehicle’s required load. This guide shows you how to spot the load index, separate it from other sidewall markings, and compare it with the tire size and load rating on the placard or owner’s manual.

What you’ll need

  • A flashlight or phone light
  • A clean rag or soft brush
  • A tire placard reference from the driver door jamb or fuel door
  • Your owner’s manual, if the placard is faded or missing
  • A pen or phone notes app to record the tire size and load index

Where is the load index on the tire sidewall?

The load index is usually part of the tire service description on the sidewall. Look for the tire size first, then find the two- or three-digit number that follows it and comes before the speed rating letter. On some tires, that same area may also include extra load markings such as XL or LT, so read the whole line before you decide.

Service description layout

The service description combines three items: tire size, load index, and speed rating. A common example is 225/45R17 94V. Here, 225/45R17 is the tire size, 94 is the load index, and V is the speed rating.

Marks that can be mistaken for it

Do not confuse the load index with the DOT code, which often starts with “DOT” and continues with letters and numbers. Also do not confuse it with max load or max pressure, which are separate markings and may appear elsewhere on the sidewall. Those figures help verify the tire, but they are not the service description itself.

How to read the sidewall step by step

Read the tire sidewall from the size code to the service description, then verify the number against the vehicle placard. The goal is to separate the load index from nearby text, especially on tires with extra markings or small print. If the sidewall is dirty or worn, clean it before you interpret the numbers.

  1. Find the tire size first. Look for a format such as 225/45R17 or LT245/75R16. This gives the section width, aspect ratio, and rim diameter, and it anchors the rest of the sidewall reading.

  2. Locate the load index number. Find the two- or three-digit number immediately after the size code. In 225/45R17 94V, the load index is 94. In LT245/75R16 120/116S, the load index appears as a paired rating for single and dual use.

  3. Match the speed rating letter. The letter after the load index is the speed rating, such as V, S, or H. Keep it separate from the load index. A number tells you load capacity; the letter tells you speed capability under rated conditions.

  4. Check the extra markings. Look for DOT, max load, max pressure, or XL. Use them as confirmation only. If the sidewall shows MAX PRESS 51 PSI, that is the tire’s maximum pressure, not the pressure you should inflate to unless the placard says so.

Say your tire shows 235/55R19 105H with a separate MAX LOAD 2039 LB (925 KG) line nearby. The load index is still 105. The max-load figure confirms the tire’s capacity rating, but it does not replace the load index or the vehicle’s placard recommendation.

How do you verify the load index with the placard?

Use the vehicle tire placard as the first reference. It is usually on the driver door jamb or fuel door and lists the original tire size and recommended inflation. If the placard is hard to read, missing, or faded, check the owner’s manual for the original tire specification and any load-related notes. Match the sidewall service description to those details before you buy or install a tire.

  1. Read the placard size first. Match the placard’s tire size to the tire sidewall size. If the size does not match, stop and confirm the application before comparing load index numbers.

  2. Compare the load index next. Check that the sidewall load index meets or exceeds the placard requirement. Do not guess based on size alone, because two tires with the same size can carry different loads.

  3. Use the manual if needed. If the placard is faded, missing, or hard to read, open the owner’s manual and look for the original tire specification or load-related notes. This matters on vehicles with optional packages or special payload limits.

Suppose the placard calls for 225/45R17 94V and the sidewall you are reading shows 225/45R17 91V. The size and speed rating match, but the load index does not. That tire is not the right match unless the vehicle manufacturer allows the lower rating, which most placards do not.

Sidewall decoding checklist

Use this checklist to split the service description from other sidewall markings. Each sample shows one way the sidewall may combine tire size, load index, speed rating, DOT code, max load, and max pressure.

Sample tire stringTire sizeLoad indexSpeed ratingDOT codeMax loadMax pressureWhat to ignore
225/45R17 94V DOT AB12 3C4D 1023 1477 LB (670 KG) MAX PRESS 51 PSI225/45R1794VDOT AB12 3C4D 10231477 lb (670 kg)51 psiDo not read the DOT block or the max-pressure line as the load index.
LT245/75R16 120/116S DOT 1A2B 3C4D 2822 MAX LOAD 3195 LB SINGLE 2835 KG MAX PRESS 80 PSILT245/75R16120/116SDOT 1A2B 3C4D 28223195 lb single80 psiDo not split the LT marking from the service description or confuse the dual rating with a speed code.
235/55R19 105H XL DOT X9YZ 1K2L 2024 MAX LOAD 2039 LB (925 KG) MAX PRESS 51 PSI235/55R19105HDOT X9YZ 1K2L 20242039 lb (925 kg)51 psiDo not treat XL as the load index; it is an extra-load marking near the service description.

Common mistakes when reading tire markings

The most common mistake is reading only the tire size and skipping the number that follows it. Another is mixing up the load index with the speed rating letter or with the DOT code. Dirty rubber, worn sidewalls, and partially hidden print can also hide the service description.

  • Reading tire size alone. Size is not enough. Match size, load index, and speed rating together.
  • Using max pressure as a target. Maximum pressure is a limit, not a recommendation. Use the placard pressure unless the manual says otherwise.
  • Missing LT, XL, or dual ratings. These markings change how the tire is rated. Read them with the service description, not apart from it.
  • Trusting a dirty sidewall. Wipe the area clean and rotate the tire if needed to find the full marking.
  • Ignoring the placard. The placard or owner’s manual is the reference point when the sidewall text is hard to read.

If that did not work, start with the placard again and compare only the service description line. Then look for the owner’s manual specification page. If the tire has extra load markings or the sidewall is too worn to read, replace the tire only after you confirm the correct size and load index from the vehicle source.

Frequently asked questions

How do I find the load index on a tire sidewall?

Look for the tire size first, then read the next two- or three-digit number before the speed rating letter. In 225/45R17 94V, the load index is 94. If the sidewall also shows DOT, max load, or max pressure, ignore those lines while you identify the service description.

What do the numbers on a tire sidewall mean?

The numbers usually show the tire size, then the load index, and sometimes a max-load or max-pressure figure elsewhere on the sidewall. The size tells you fitment, the load index tells you load capacity, and the max-pressure number tells you the tire’s upper limit, not the recommended inflation pressure.

Is the load index on the tire or the placard?

It appears on the tire sidewall as part of the service description, but the placard is the reference you should use to confirm it. The driver door jamb placard usually lists the original tire size and inflation spec. If the placard is unreadable, check the owner’s manual before buying a replacement.

What if I can’t find the load index on the sidewall?

Clean the sidewall and look for the size code again. If the marking is worn off or hidden, rotate the tire to inspect another section. If it still is not visible, use the vehicle placard or owner’s manual to confirm the required load index before replacing the tire.

Do all tires show load index the same way?

No. Most passenger tires show a two- or three-digit number after the size and before the speed rating, but LT and extra-load tires can add different markings or dual ratings. Read the whole service description line, then confirm it against the placard rather than assuming every tire prints the same way.

How do I read tire sidewall information?

Start with the tire size, then identify the load index and speed rating as one service description. After that, check for DOT, max load, max pressure, and any extra markings such as XL or LT. Use the placard or manual to confirm that the service description matches the vehicle requirement.

Similar Posts